Let's Get In Touch
Contact Us
Vacuum Carburizing and Quenching Oils
Cold Quenching Oil
<< JIS Class 1 No. 2 >>
| Product Name | Viscosity
mm2 / s |
H value
1 / cm |
Characteristic | Use |
| Special Quench Oil V-1600S | 16.7 ± 2.5 (40 ° C) | 0.144 | Excellent cooling performance, but some oil vapor is generated under reduced pressure. | Especially good for processed products that require hardenability. |
| Special Quench Oil V-1700S | 16.2 ± 2.5 (40 ℃) | 0.147 | High cooling performance and good thermal stability.
|
Good for processed products that require hardenability. |
| Special Quench Oil V-1900S | 24.7 ± 2.3 (40 ℃) | 0.135 | It has excellent brilliance, excellent cooling performance and stability at high temperatures. | When the quenching temperature is 1000 ° C or higher, it is suitable for vacuum carburizing and light brightness. |
Semi-Hot Quenching Oil
<< JIS Class 2 No. 1 >>
| Product Name | Viscosity
mm2 / s |
H value
1 / cm |
Characteristic | Use |
| Hot Quench Oil No.809XVC | 8.0 ± 2.0 (100 ℃) | 0.102 | Excellent brilliance and little distortion. There is little oil vapor under reduced pressure. | It is used when distortion is a problem and brilliance is required. |
| Martemper Oil V-2500 | 12.1 ± 2.0 (100 ℃) | 0.111 | Good cooling performance and little distortion. Semi-hot type. | It is used when it is a processed product where distortion is a problem and hardenability is required to some extent. |
| Martemper Oil V-2900 | 18.56 ± 2.0 (100 ℃) | 0.103 | There is little distortion, and there is little oil vapor under reduced pressure. | It is a processed product with good hardenability due to distortion. |
Hot Quenching Oil
≪JIS2 type 2≫
| Product Name | Viscosity
mm2 / s |
H value
1 / cm |
Characteristic | Use |
| Martemper Oil V-3500 | 32.00 ± 2.0 (100 ℃) | 0.08 | It has less distortion and is a multi-temper type with the least amount of oil vapor. | Vacuum multi-temper processing and high temperature use from 150 ℃ to 200 ℃ are possible. |
Cold Quenching Oil
<< JIS Class 1 No. 1 >>
| Product Name | H value
1 / cm |
viscosity
mm2 / s 40 ℃ |
viscosity
mm2 / s 100 ℃ |
Use |
| Quench Oil K-1 | 0.118 | 20.7 ± 3.0 | For springs, general material tempering, small parts of alloy steel, and quenching of steel with good hardenability. | |
| Special Quench Oil XD | 0.12 | 20.0 ± 3.2 | For material tempering of general structural steel and quenching of small and medium parts, and for quenching after salt heating. | |
| Special Quench Oil No.70 | 0.12 | 22.4 ± 3.0 | For injection quenching and prequenching. It also exhibits its characteristics for bright quenching after salt heating. |
Cold Quenching Oil
<< JIS Class 1 No. 2 >>
| Product Name | H value
1 / cm |
viscosity
mm2 / s 40 ℃ |
viscosity
mm2 / s 100 ℃ |
Use |
| Highspeed Quench Oil No.1070 | 0.15 | 15.5 ± 1.5 | It is the No. 1 record of high speed quench usage. | |
| Highspeed Quench Oil No.1070H | 0.145 | 25.3 ± 2.8 | Highspeed Quench Oil No.1070 low distortion type. It has a proven track record as a Quenching oil for roller bearing. | |
| Highspeed Quench Oil BT | 0.15 | 19.5 ± 3.0 | It is suitable for quenching all types of steel and has the feature of less replenishing oil. | |
| Highspeed Quench Oil K | 0.16 | 22.8 ± 3.0 | For quenching and forging quenching of forged parts. Low cost ultra high speed quench. | |
| Highspeed Quench Oil MPL | 0.145 | 23.1 ± 3.2 | Suitable for general quenching, oil injection quenching, Circulating stirring type oil tank and salt heating. | |
| Highspeed Quench Oil MP | 0.147 | 22 | Suitable for quenching all types of steel, especially for carburizing pit furnaces and large bearing races. | |
| Highspeed Quench Oil X | 0.168 | 20.9 ± 3.2 | Super cooling (between water and general Highspeed Quench Oil) Used for aircraft parts. | |
| Highspeed Quench Oil X-T | 0.177 | 18.4 ± 2.8 | Ultra-cooling (between water and general Highspeed Quench Oil) Luxury product for large parts. | |
| Highspeed Quench Oil X-3M | 0.175 | 23.9 ± 2.8 | It is a fourth petroleum and has excellent cooling properties, and is suitable for quenching carbon steel and all other steel types. |
Semi-Hot Quenching Oil
<< JIS Class 2 No. 1 >>
| Product Name | H value
1 / cm |
viscosity
mm2 / s 40 ℃ |
viscosity
mm2 / s 100 ℃ |
Use |
| Hot Quench Oil No.58E | 0.14 | 12.10 ± 2.0 | It can be used as Martemper Oil at high temperatures. Has excellent oxidative stability. | |
| Hot Quench Oil No.58E-O | 0.121 | 11.98 ± 2.0 | It is used for processed products where distortion is a problem in No.58E, and the hardenability is adjusted. | |
| Hot Quench Oil No.300 | 0.125 | 7.98 ± 1.5 | For modified marquenching. Oil temperature 80 ~ 120 ℃ is high temperature. | |
| Hot Quench Oil No.303 | 0.111 | 8.08 ± 1.5 | For modified marquenching. We have a lot of experience in quenching bearing races. | |
| Hot Quench Oil No.809 | 0.113 | 7.98 ± 1.5 | For modified marquenching. We have a lot of experience in quenching bearing races. | |
| Hot Quenching Oil No.809XV | 0.102 | 7.90 ± 1.0 | Widely used for quenching bearing races. There is little sludge and the brilliance is maintained. | |
| Bright Martemper Oil No.18E | 0.105 | 18.88 ± 2.0 | Modified Maltemper oil, suitable when quenching hardening depth is required. | |
| Bright Martemper Oil No. 99 | 0.104 | 18.56 ± 2.0 | For gas carburized martempers of hardenable steel grades with SCM415 or higher at an oil temperature of 120 to 150 ° C. | |
| Bright Martemper Oil No.99L | 0.108 | 14.59 ± 1.5 | It is highly hardenable as a Martemper Oil and has a proven track record in thick bearing races. |
Hot Quenching Oil
≪JIS2 type 2≫
| Product Name | H value
1 / cm |
viscosity
mm2 / s 40 ℃ |
viscosity
mm2 / s 100 ℃ |
Use |
| Bright Martemper Oil L | 0.095 | 25.30 ± 2.0 | For brilliant martempers with all adjustment atmospheres. | |
| Bright Martemper Oil S | 0.095 | 26.77 ± 2.0 | Suitable for gas carburized multempers and bright multempered bearings. | |
| Bright Martemper Oil | 0.089 | 32.00 ± 2.0 | Suitable for gas carburized multempers and bright multempered bearings. | |
| Martemper Oil No.2 | 0.095 | 25.30 ± 2.0 | For gas carburizing multemper and multemper treatment after salt heating. | |
| Martemper Oil No.35E | 0.105 | 31.41 ± 2.0 | We have many achievements in bearing racing with low distortion maltemper oil. |
Bright Quenching Oil
<< JIS Class 1 No. 1 >>
| Product Name | H value
1 / cm |
viscosity
mm2 / s 40 ℃ |
viscosity
mm2 / s 100 ℃ |
Use |
| Bright Quench Oil | 0.12 | 21.9 ± 2.5 | A low-distortion Quenching Oil used for atmospheric quenching, especially bright quenching. |
Bright Quenching Oil
<< JIS Class 1 No. 2 >>
| Product Name | H value
1 / cm |
viscosity
mm2 / s 40 ℃ |
viscosity
mm2 / s 100 ℃ |
Use |
| Bright Quench Oil S-1050 | 0.13 | 27.4 ± 2.5 | For heat treatment work in a general atmosphere furnace and precision heat treatment work. Can be used in a wide range. | |
| Bright Quench Oil S-1080K | 0.135 | 19.5 ± 2.5 | Good separability from washing water in a continuous furnace. We have many achievements in tapping screws. | |
| Bright Quench Oil H-2050 | 0.144 | 21.2 ± 2.5 | We have a track record in bearing races, rollers, etc. in heat treatment work using a general atmosphere furnace. | |
| Bright Quench Oil No.12 | 0.125 | 30.0 ± 2.5 | Demonstrates excellent performance for bright quenching of continuous furnaces and batch furnaces. |
| Product Name | Characteristics and applications |
| Solquench WP-3000S | The hardenability is a little insensitive, but the ability to prevent quench cracking is high. For induction hardening and For immersion quenching. |
| Solquench WP- 2000S | It has excellent hardenability and has a high ability to prevent quench cracking, making it ideal for For immersion quenching. |
| Solquench WP-8000S | It has a high ability to prevent quench cracking, good oil separability, and has a proven track record in induction hardening. |
| Solquench WP-8300S | It has low viscosity and good oil separability. We have many achievements in induction hardening. |
| Solquench WP-8600S | Low viscosity. Very good in rust and antiseptic power. For sub-hardening and induction hardening. |
| Solquench WP-8900S | Low viscosity. Very good in rust and antiseptic power. For sub-hardening and induction hardening. |
| Solquench WP-1300S | Has excellent hardenability and rust prevention. Ideal for induction hardening with a deep curing depth. |
| Solquench WP-1100S | Has excellent ability to prevent burning. Can be used at low concentrations. For induction hardening. |
Contact Us