Let's Get In Touch
Contact Us
Introducing Press Oil
Press oil NO. and G series
Based on the N0.6## series that has excellent basic performance, we have a large number of variations of products, including the G series, which has enhanced types such as anti-seizure performance, rust prevention performance, and cleaning performance.
Representative products
No.630R Press oil – Water-insoluble general use –
NO.630R is an oil for general press processing of carbon steel and non-ferrous metals. Non-chlorine and non-sulfur based and has excellent cleaning properties, making it suitable for drawing, bending, and punching of automobile parts, electronic and electrical parts, etc.
G-3273 Cutting oil – Water-insoluble, non-chlorine, general use –
G-3273 is a standard chlorine- and sulfur-free press for carbon steel sheets. No need to worry about rust caused by chlorine-based additives, and there is very little tar formation during welding after press processing therefore it is used in many processes such as automobile parts.
G-3043E Machine oil – Water-insoluble, non-chlorine type, general use –
G-3043E is a cutting oil that can be used for bending, transfer drawing, and general punching of steel plates. Almost no rust, tarring, or darkening of the workpiece during welding.
G-3641 Machine oil – Water-insoluble, non-chlorine based, high performance type –
G-3641 is a water-insoluble cutting oil that is mainly applicable to bending, deep drawing, and punching of steel plates.
Additives such as sulfur compounds maintain excellent drawing performance, seizure resistance, and ironing properties. Since no chlorine compounds are used, it is environmentally friendly and does not cause rust from chlorine compounds.
Aluminum/Aluminum Alloy Press oil
| Product name | Application |
| G-3004 | A series excellent in preventing darkening and deterioration during drawing of aluminum and aluminum alloys and can be used in a wide range from thin to thick plates. |
| G-3005 | |
| G-3044 | |
| G-3144 | |
| G-3244 | |
| G-3344 | |
| G-3444 | |
| G-3644 |
Press oil to prevent bumping during drying before painting.
| Product name | Application |
| HS-8015 | Prevents processing oil from remaining inside the mating parts of pressed products from boiling during drying (heating) that cause paint repellency before the painting process. |
| HS-8035 | |
| HS-8060 | |
| HS-8150 | |
| HS-8250 |
Water-Soluble Press oil
| Product name | Type | Application |
| S-1030 | Wax | Ideal for deep drawing and ironing for steel plates and stainless steel. |
| G-2960 | Wax emulsion | Deep drawing for steel plates and stainless steel. |
| G-2525 | Synthetic | General drawing for steel plates, stainless steel, and aluminum. |
| UC-2500 | Emulsion | Applicable to deep drawing and transfer processing of steel plates, copper, and aluminum. |
| UC-2510 | Emulsion | Applicable to deep drawing and ironing for steel plates. |
| G-2576 | Precoat | For deep drawing of stainless steel and titanium. |
Introducing Non-Chlorine Press Oil
Non-Chlorine Press oil E series
Many chemical substances have come to be seen as problematic one after another due to various issues surrounding the earth and the living environment. Processed oil is no exception. Processing oils containing chlorine compounds, an additive with excellent anti-seizure properties, are facing increasing new challenges, such as concerns about the generation of dioxins when waste oil is incinerated. We take these challenges seriously and strive every day to play a leadership role in the industry. The E series is a processing oil that meets such social demands.
What is E series?
• No chlorine-based extreme pressure agents are added.
• Does not fall under the PRTR Act.
• As it is non-chlorine based, it is effective in preventing rust on products。
• As it is non-chlorine based, no chlorine gas affects the incinerator.
• As it is non-chlorine based, waste oil collection fee is low.
EL series
| Product name | Features |
| EL-7100 |
|
| EL-7110 | |
| EL-7120 | |
| EL-7130 | |
| EL-7140 | |
| EL-7150 | |
| EL-7160 | |
| EL-7170 |
EM series
| Product name | Features |
| EM-7200 |
|
| EM-7210 | |
| EM-7220 | |
| EM-7230 | |
| EM-7240 | |
| EM-7250 | |
| EM-7260 | |
| EM-7270 |
EH series
| Product name | Features |
| EH-7300 |
|
| EH-7310 | |
| EH-7320 | |
| EH-7330 | |
| EH-7340 | |
| EH-7350 | |
| EH-7360 | |
| EH-7370 |
EP series
| Product name | Features |
| EP-7400 |
|
| EP-7410 | |
| EP-7420 | |
| EP-7430 | |
| EP-7440 | |
| EP-7450 | |
| EP-7460 |
New EP series
| Product name | Features |
| EP-7401 |
|
| EP-7411 | |
| EP-7421 | |
| EP-7431 | |
| EP-7441 | |
| EP-7451 | |
| EP-7461 |
EPH series
| Product name | Features |
| EPH-7500 |
|
| EPH-7510 | |
| EPH-7520 | |
| EPH-7530 | |
| EPH-7540 | |
| EPH-7550 | |
| EPH-7560 |
Introducing Rust-Proof Press Oil
Rust-Proof Press oil PG series
The PG-3### series is lined up such that you can select a product that matches the conditions after press processing. In particular, the basic design is designed to strengthen rust prevention in the storage environment after press processing, and it provides excellent metal protection. Can be applied to all materials and no need to worry about discoloration or corrosion. We have a wide range of products from grades suitable for multi-processes including laddering to deep drawing of tandem thick plates.
Representative product
PG-3246 Press Oil – Water-insoluble, non-chlorine-based, rust-proof type –
PG-3246 is a non-chlorine and non-sulfur press oil mainly used for bending and drawing (deep) processing of steel plates. Has excellent alkaline degreasing properties and can be used for welding, with almost no rust or tar formation. It can be applied to a wide range of surfaces, including surface-treated steel sheets, non-ferrous metals such as aluminum and copper, and has a proven track record in stamping automobiles, electrical parts, etc.
PG-3740 Press Oil – Water-insoluble, non-chlorine, rust-proof –
PG-3740 is a chlorine-free, non-sulfur based, high viscosity anti-corrosion type press oil mainly used for deep to very deep drawing of steel plates. In particular, it has superior rust prevention and degreasing properties compared to products of the equivalent viscosity. It also has excellent welding resistance and almost no occurrence of rust or tar formation caused by the amount of adhesion. Also, it is suitable for surface-treated steel sheets, aluminum, copper, etc. It can be applied to a wide range of materials and has many achievements in deep drawing in the automobile and electrical parts industries, including oil pan molding.
Introduction to Precision Punching Oil for thick plates
Precision Punching oil for thick plates
For Extending mold life. Improving punching shear surface
| Product name | Application |
| FB-461 | This type can be applied from general precision punching to FB punching. Our rich experience with brake pads, and there are many variations from low viscosity to high viscosity therefore, you can choose according to your processing needs. |
| FB-463 | |
| FB-465 | |
| FB-466E | This type has a high oil film strength. May also be applied to composite processing that combines FB punching and forging (half punching, doweling, tooth shape, etc.). The accuracy of the sheared surface is also very good, and it can be applied for machining complex shapes. |
| FB-466S | |
| FB-464S | Uses luxurious volume of special additives. Can withstand high speeds |
| FB-468 | |
| FB-475L | Applicable to processing where sulfur compounds cannot be used. |
| FB-475S |
Introduction of Punching Oil for thin plates
Punching oil for thin plates
This series is available for various uses and purposes, from non-cleaning parts with an unnoticeable residual oil feel to products that prioritize machining performance under high-speed and difficult machining conditions, with mold life as the top priority. We have different types available depending on usage and purpose.
Drying Punching oil
Non Degreasing type
For parts that require an inconspicuous residual oil feel!
| Product name | Application |
| G-6312FK | No residual oil feeling and no uneven drying color. A high-performance product that can also be tapped. |
| G-6316F | A type that considers the corrosion resistance of non ferrous metals. Suitable for high-speed progressive presses. |
| G-6376F | This type considers the corrosion resistance of non-ferrous metals and is suitable for progressive presses including light drawing. |
| G-6318FK | A high-performance product that can be used for burring, tapping, and ironing. |
| G-6318FX | G-6318FK compatible type with chromium-free steel plate. |
| G-6360FK | High performance product, improved mold life, also suitable for punching ultra-thin stainless-steel plates. |
Thin film residual oil type
For parts that may have some residual oil or to reduce the cleaning load!
| Product name | Application |
| ES-6100 | Can be used with a wide range of materials. Suitable for purling, tapping, and multi-step progressive feeding. |
| ES-6120 | A low-viscosity, high-performance product developed for stainless steel and iron-based materials. |
| G-6376FU | This type considers the corrosion resistance of non-ferrous metals and is also suitable for multi-stage drawing. |
| G-6370K | Good lubricity, suitable for progressive presses including multi-stage drawing. |
For Electrical steel sheets
For ensuring machining performance and post-processing quality!
| Product name | Application |
| G-6329F | Good annealing properties. Good countermeasures against welding blowholes and carbon. |
| G-6338F | Prevents welding inside the mold. Good annealing properties. |
| G-6339F | Prevents welding inside the mold. Suitable for multiple processes, large cores, and stators. Good annealing properties. |
High performance punching oil.
| Product name | Application |
| G-6513 | Applicable to a wide range of materials including electronic and electrical parts. Suitable for high-speed punching. |
| G-6515 | Applicable to a wide range of materials including electronic and electrical parts. G-6515E, which has good cleaning properties is also available. |
| G-3017 | Applicable to a wide range of materials including electronic and electrical parts. |
| G-3022 | Suitable for punching and forming electronic and electrical parts. |
| ES-6535 | A high-performance product developed for stainless steel and iron-based materials. |
| ES-6530 | ES-6535 high viscosity type. |
Introducing Non-Clean Press Oil
Non-Cleaning Press oil
Non-Clean Press oil (0% non-volatile content)
This series uses completely dry press oil, and the oil content disappears after processing, so there is no need for a cleaning process. Has already been well received in many thin plate press processing situations, such as eliminating ODS solvent cleaning in environmentally conscious production processes and applying it to surface-treated steel sheets that are widely used mainly in the home appliance industry.
For surface treatment steel plate/copper plate materials
| Product name | Application |
| G-6215F | Suitable for thin plate processing such as contact and electronic component punching and bending. |
| G-6215FS | G-6215F’s improved lubricity type allows tapping. |
| G-6215FA | Improved dry type of G-6215FS. |
| G-6221F | Has particularly excellent seizure resistance and can be used for punching and bending SUS. |
| G-6221FA | Quick-drying improved type of G-6221F. |
| G-6231F | Totally balanced high performance product with high lubricity, quick drying, and tap. |
For Aluminum plate material
| Product name | Application |
| G-6216F | This type focuses on aluminum machining and takes lubricity into consideration, and tap machining is also possible. |
| G-6216FA | Suitable for fin processing, punching, bending, and tapping. |
| G-6216FS | Suitable for processes with slow drying with many stages. |
For sheet drawing of various materials
| Product name | Application |
| G-6280 | Suitable for punching, bending, and light drawing of galvanized steel sheets. |
| G-6281 | Suitable for punching, bending, and light drawing of steel plates (including stainless steel). |
| G-6284 | Effective for bending and drawing with emphasis on aluminum processing. |
| G-6286 | Effective for punching, bending, and drawing thick plates. Forced drying required. |
Introducing Header/Cold Homing Oil
Header/Cold homing oil – CF series –
Header/cold homer cutting oil emphasizes low viscosity and high workability compared to conventional products, making it to improve product accuracy and extend tool life.
Has ability to withstand even when the temperature of the workpiece reaches high temperatures, and the use of highly refined base oil and additives suppresses rust.
Representative products
CF-863TM Cutting Oil
This is a non-chlorine and non-sulfur smoke prevention product. It has a high flash point, produces little smoke, and is a product with oxidation suppression in mind. Has a lot of experience with multi-stage drawing fasteners regardless of the material.
CF-864 Cutting Oil
This chlorine-free, sulfur-based machine oil maintains high lubricity even during harsh machining such as blow molding and splining. It is used as a bond free material in the processing of important safety parts for automobiles.
CF-834 Cutting Oil
Has many achievements in processing workpieces such as nuts and homers.
CF-879 Cutting Oil
Slightly high viscosity product that can be applied to everything from carbon steel to stainless steel. It is also widely used for general press (deep drawing and ironing) processes other than cold forming.
Introducing Drawing Oil
Drawing oil
We offer products for purposes such as pipe drawing, warm processing, and secondary lubrication after phosphoric acid treatment. You can expect excellent lubrication performance.
Representative products
G-708
An oil agent that replaces metal soap used after phosphoric acid treatment. Used for high area reduction ratio of base treatment materials.
G-2576
Dry film type lubricant. Dry coating treatment of untreated wood.
G-3704
Oil containing special additives. Used for high area reduction, good annealing properties.
Introducing Rolling Oil
Rolling oil
We offer products suitable for multi-roll and rotary swaging processing.
Representative products
G-955 rolling oil
Suitable for rolling ultra-thin sheets of permalloy, tantalum, stainless steel, beryllium copper, phosphor bronze, nickel silver, etc.
G-957 rolling oil
Suitable for multi-roll and rotary swaging processing.
Contact Us