Memperkenalkan Press Oil

Press oil NO. and G series
Berdasarkan seri N0.6## yang memiliki performa dasar yang istimewa, kami memiliki banyak sekali variasi produk, termasuk seri G, yang memiliki tipe yang sudah disempurnakan, seperti performa anti-seizure, performa pencegahan karat, dan performa pembersihan.

Representative products

No.630R Press oil – Water-insoluble general use –
NO.630R adalah oli untuk pemrosesan press umum baja karbon dan logam non-ferro. Produk ini tidak mengandung klorin dan sulfur serta memiliki sifat pembersihan yang sangat baik, sehingga cocok untuk penggambaran, membengkokkan, dan melubangi suku cadang mobil, komponen elektronik dan listrik, dll.

G-3273 Cutting oil – Water-insoluble, non-chlorine, general use –
G-3273 adalah produk standar bebas klorin dan sulfur untuk mesin press lembaran baja karbon. Tidak perlu khawatir tentang karat yang disebabkan oleh aditif berbasis klorin, dan hanya ada sedikit pembentukan tar selama pengelasan setelah proses press sehingga digunakan dalam banyak proses seperti suku cadang mobil.

G-3043E Machine oil – Water-insoluble, non-chlorine type, general use –
G-3043E adalah cutting oil yang dapat digunakan untuk pembengkokan, transfer drawing, dan pelubangan pelat baja secara umum. Hampir tidak ada karat, tarring, atau penggelapan benda kerja selama pengelasan.

G-3641 Machine oil – Water-insoluble, non-chlorine based, high performance type –
G-3641 adalah cutting oil yang tidak larut dalam air yang terutama dapat digunakan untuk membengkokkan, deep drawing, dan melubangi pelat baja.
Aditif seperti senyawa sulfur mempertahankan kinerja penarikan yang sangat baik, ketahanan terhadap seizure, dan terhadap gesekan. Karena tidak menggunakan senyawa klorin, maka produk ini ramah lingkungan dan tidak menyebabkan karat akibat senyawa klorin.

Aluminum/Aluminum Alloy Press oil

Press oil untuk mencegah benturan selama pengeringan sebelum pengecatan.

Water-Soluble Press oil

• Pre-coat: Membentuk lapisan film setelah dikeringkan.
• Produk yang tercantum dalam katalog ini adalah produk representatif kami. Masih banyak produk lain yang tersedia. Silakan hubungi perwakilan penjualan Anda atau kantor penjualan kami untuk informasi lebih lanjut.

Introducing Non-Chlorine Press Oil

Non-Chlorine Press oil E series

Many chemical substances have come to be seen as problematic one after another due to various issues
surrounding the earth and the living environment. Processed oil is no exception. Processing oils containing
chlorine compounds, an additive with excellent anti-seizure properties, are facing increasing new challenges,
such as concerns about the generation of dioxins when waste oil is incinerated. We take these challenges
seriously and strive every day to play a leadership role in the industry. The E series is a processing oil that meets
such social demands.

What is E series?
• No chlorine-based extreme pressure agents are added.
• Does not fall under the PRTR Act.
• As it is non-chlorine based, it is effective in preventing rust on products。
• As it is non-chlorine based, no chlorine gas affects the incinerator.
• As it is non-chlorine based, waste oil collection fee is low.

EL series

EM series

EH series

EP series

New EP series

EPH series

Introducing Rust-Proof Press Oil

Rust-Proof Press oil PG series
The PG-3### series is lined up such that you can select a product that matches the conditions after press processing. In particular, the basic design is designed to strengthen rust prevention in the storage environment after press processing, and it provides excellent metal protection. Can be applied to all materials and no need to worry about discoloration or corrosion. We have a wide range of products from grades suitable for multi-processes including laddering to deep drawing of tandem thick plates.

Representative product
PG-3246 Press Oil – Water-insoluble, non-chlorine-based, rust-proof type –
PG-3246 is a non-chlorine and non-sulfur press oil mainly used for bending and drawing (deep) processing of steel plates. Has excellent alkaline degreasing properties and can be used for welding, with almost no rust or tar formation. It can be applied to a wide range of surfaces, including surface-treated steel sheets, non-ferrous metals such as aluminum and copper, and has a proven track record in stamping automobiles, electrical parts, etc.

PG-3740 Press Oil – Water-insoluble, non-chlorine, rust-proof –
PG-3740 is a chlorine-free, non-sulfur based, high viscosity anti-corrosion type press oil mainly used for deep to very deep drawing of steel plates. In particular, it has superior rust prevention and degreasing properties compared to products of the equivalent viscosity. It also has excellent welding resistance and almost no occurrence of rust or tar formation caused by the amount of adhesion. Also, it is suitable for surface-treated steel sheets, aluminum, copper, etc. It can be applied to a wide range of materials and has many achievements in deep drawing in the automobile and electrical parts industries, including oil pan molding.

Introduction to Precision Punching Oil for thick plates

Precision Punching oil for thick plates

For Extending mold life. Improving punching shear surface

Introduction of Punching Oil for thin plates

Punching oil for thin plates

This series is available for various uses and purposes, from non-cleaning parts with an unnoticeable residual oil
feel to products that prioritize machining performance under high-speed and difficult machining conditions, with
mold life as the top priority. We have different types available depending on usage and purpose.

Drying Punching oil

Non Degreasing type
For parts that require an inconspicuous residual oil feel!

Thin film residual oil type

For parts that may have some residual oil or to reduce the cleaning load!

For Electrical steel sheets

For ensuring machining performance and post-processing quality!

High performance punching oil.

Introducing Non-Clean Press Oil

Non-Cleaning Press oil

Non-Clean Press oil (0% non-volatile content)
This series uses completely dry press oil, and the oil content disappears after processing, so there is no need for
a cleaning process. Has already been well received in many thin plate press processing situations, such as eliminating ODS solvent cleaning in environmentally conscious production processes and applying it to surface-treated steel sheets that are widely used mainly in the home appliance industry.

• Cost reduction achieved by omitting the cleaning process.
• Painting, printing, plating, labeling, screw tightening, resin installation, etc. can be done without
  cleaning.
• Free the work site from oil stains.

For surface treatment steel plate/copper plate materials

For Aluminum plate material

For sheet drawing of various materials

Introducing Header/Cold Homing Oil

Header/Cold homing oil – CF series –
Header/cold homer cutting oil emphasizes low viscosity and high workability compared to conventional products, making it to improve product accuracy and extend tool life.
Has ability to withstand even when the temperature of the workpiece reaches high temperatures, and the use of highly refined base oil and additives suppresses rust.

Representative products
CF-863TM Cutting Oil
This is a non-chlorine and non-sulfur smoke prevention product. It has a high flash point, produces little smoke, and is a product with oxidation suppression in mind. Has a lot of experience with multi-stage drawing fasteners regardless of the material.

CF-864 Cutting Oil
This chlorine-free, sulfur-based machine oil maintains high lubricity even during harsh machining such as blow molding and splining. It is used as a bond free material in the processing of important safety parts for automobiles.

CF-834 Cutting Oil
Has many achievements in processing workpieces such as nuts and homers.

CF-879 Cutting Oil
Slightly high viscosity product that can be applied to everything from carbon steel to stainless steel. It is also widely used for general press (deep drawing and ironing) processes other than cold forming.

Introducing Drawing Oil

Drawing oil
We offer products for purposes such as pipe drawing, warm processing, and secondary lubrication after phosphoric acid treatment. You can expect excellent lubrication performance.

Representative products

G-708
An oil agent that replaces metal soap used after phosphoric acid treatment. Used for high area reduction ratio of base treatment materials.

G-2576
Dry film type lubricant. Dry coating treatment of untreated wood.

G-3704
Oil containing special additives. Used for high area reduction, good annealing properties.

Introducing Rolling Oil

Rolling oil
We offer products suitable for multi-roll and rotary swaging processing.

Representative products

G-955 rolling oil
Suitable for rolling ultra-thin sheets of permalloy, tantalum, stainless steel, beryllium copper, phosphor bronze, nickel silver, etc.

G-957 rolling oil
Suitable for multi-roll and rotary swaging processing.